 From Dash Changes to Rear light changing, The list is growing. We have some Mod-wise mods online too and hopefully the list will Grow. Brake upgrades with Peter Humphries ( Green V8S ) telling us what to look out for. Allways looking for more interesting mods you owners may have done especially engine ones.
|
|
Chassis Modifications
|
|
Written by Antony Pattison
|
Antony Pattison has very kindly sent us this article of his recent pre-cat restoration. Its a great article as I am sure you will agree and its great to see an owner taking this on and Documenting it to share with us. Thanks Ant. - Chassis Assessment
- Body removal
- Chassis repair
- Body work
- Body re-fit.
- Pistonheads Wiki article
- Thanks
| |
|
|
Read more...
|
|
|
Chassis Modifications
|
|
Written by Rob Brookbanks
|
TVR Wishbone Bush Press Not so pressing now with the help from Rob who has had bush removal tool made making the job much more bearable. I wanted to change the standard bushes on my Griff for Powerflex ones. Everyone I had spoken to said “Ooh, you’ll need a press for that” (and drew in their breath over their teeth at the same time) or to drill/burn/hacksaw them out. Neither option suited me as I wanted to do some of them in the car and the whole junior hacksaw and drill route just looked far too painful and time consuming so I set about designing my own press. The end result is not just a normal wind it in and hope tool, it’s designed so that you can use a combination of compression and percussive forces at the same time. In effect that’s a posh way of saying wind the puller pretty bloomin tight and then leather the “Top Hats”! Well not quite, but you get the idea. | |
|
|
Read more...
|
|
|
Chassis Modifications
|
|
Written by Rob Brookbanks
|
Rob Brookbanks has very kindly shared with us his information on a Body raise on his Griffith 500. This is a very in depth article on how and what to do and is surely going to be an invaluable asset to us owners who are thinking of doing the same. Especially as winter looms and we look at doing some maintenance jobs. Thanks Rob for sharing this with us.
| |
|
|
Read more...
|
|
|
Engine Modifications
|
|
Written by Bruce Rowarth
|
Bruce ( aka 2munkys ) talks us through a breathing mod he has done to his Griffith. The constraints within the engine bay of the Griff somewhat limit your options for improvements to the breathing; I know that Joo has been successful with his 'Y' pieced induction and twin filter contrivance. I understand that he's seeing good gains too which is what we all want.
| |
|
|
Read more...
|
|
|
<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
|
| Results 5 - 8 of 52 |
